Funkwerk WI2040n Bedienungsanleitung PDF herunterladen (Seite 181)

Field Description

Signal Displays the signal strength of the detected client link in dBm.

Connected Displays the status of the link on your client.

Action You can change the status of the client link. The available ac-

tions are displayed in this field.

12.1.5 Bridge Links

If you operate your device in bridge mode (Wireless LAN -> WLAN -> Radio Settings->

->Operation Mode = ($), you can set up and edit the desired bridge links in the

Wireless LAN -> WLAN -> Bridge Links-> ->/New menu.

With the bridge function, you can, for example, make a wireless connection between a

bintec W1002n and one or more other bintec W1002n devices. The range of these wire-

less connections can be several kilometres, depending on the antennas used.

Note

Always use the antennas and antenna cables supplied with the equipment to prevent

unintentional violations of the applicable law. If you have special requirements, e.g. re-

garding cable lengths, please contact your dealer or Funkwerk Enterprise Communica-

tions GmbH.

Bridges are generally used to interconnect various LAN segments at Layer 2 of the OSI

7-layer model. The special feature of bintec bridges is that the distances between these

segments can be several kilometres, without the necessity for a cable for these ranges.

If you operate a wireless port in Bridge mode, this can only be used for a bridge link. This

means:

• The port has no network name.

• Wireless clients cannot log in (associate) to this port.

• There is no node table for this port (as there are no clients).

• There is no Access Control List (ACL) for this port.

This port will only connect to the partner bridge port you have configured and also only ac-

cept connections from this port.

The bintec bridges have transmission rates far above the possibilities of the ISDN S0,

ISDN S2M or ADSL. The high-speed bridge bridge even surpasses standard Ethernet

(10BaseT, 10Base2, 10Base5).

Funkwerk Enterprise Communications GmbH

12 Wireless LAN

bintec WLAN and Industrial WLAN 169

1 2 ... 176 177 178 179 180 181 182 183 184 185 186 ... 431 432

Keine Kommentare

Funkwerk WI2040n Bedienungsanleitung Seite 181