Funkwerk WI2040n Bedienungsanleitung PDF herunterladen (Seite 174)

Field Description

Allowed Addresses Use Add to make entries and enter the MAC addresses (MAC

Address) of the clients to be permitted.

12.1.3 WDS Links

If you operate your device in access point mode (Wireless LAN -> WLAN -> Wireless

Module Settings-> ->Operation Mode =  "), you can set up and edit the

desired WDS links in the Wireless LAN -> WLAN -> WDS Links-> ->/New menu.

Important

The WDS link can only be configured in the 2.4 GHz band and in the 5 GHz band in-

door if the channel is NOT ".

The number of channels you can selected depends on the country setting. Please consult

the data sheet for your device.

WDS links (WDS = Wireless Distribution System) are static links between access points

(AP), which are generally used to connect clients with networks that are not directly ac-

cessible to them e.g. because the distance is too great. The access point sends from one

client to another access point, which then forwards the data to another client.

Important

Note that the data is transferred between the access points in unencrypted form over

the WDS link in the default configuration. You are therefore urgently advised to apply

one of the available security methods (WEP40 or WEP104) to protect data on WDS

links.

WDS links are configured as interfaces with the prefix  . They behave like VSS interface

and only differ from these with respect to the predefined routing. A WDS link is defined as a

transit network: this relates to a point-to-point connection or point-to-multipoint connection

between two access points that are included in different networks.

12.1.3.1 WDS Links -> New/

Choose the icon to edit existing entries. Choose the New button to configure other

WDS links.

12 Wireless LAN Funkwerk Enterprise Communications GmbH

162 bintec WLAN and Industrial WLAN

1 2 ... 169 170 171 172 173 174 175 176 177 178 179 ... 431 432

Keine Kommentare

Funkwerk WI2040n Bedienungsanleitung Seite 174